Last edited by Gur
Tuesday, August 18, 2020 | History

2 edition of Synthesis and characterization of dye-labeled poly(vinyl acetate-butyl acrylate) latex particles and their application to film formation and polymer interdiffusion. found in the catalog.

Synthesis and characterization of dye-labeled poly(vinyl acetate-butyl acrylate) latex particles and their application to film formation and polymer interdiffusion.

Jung Kwon Oh

Synthesis and characterization of dye-labeled poly(vinyl acetate-butyl acrylate) latex particles and their application to film formation and polymer interdiffusion.

by Jung Kwon Oh

  • 64 Want to read
  • 6 Currently reading

Published .
Written in English


About the Edition

Different dye-labeled latex particles were synthesized. Donor-labeled P(VAc-BA) latex particles were prepared with phenanthrene (Phe) as the donor group. Attempts to synthesize latex particles labeled with anthracene (An) as the corresponding acceptor group failed because An derivatives inhibited VAc polymerization. New polymerizable dimethylaminobenzophenone (NBen) derivatives were developed. These NBen derivatives proved to be useful energy transfer acceptors for Phe and they were compatible with VAc polymerization.A broad series of P(VAc-BA) latex particles labeled with Phe and with NBen were prepared. These latex particles contain significant amounts of gel. This gel has a strong influence on polymer diffusion in latex films. The amount of gel in the polymer could be reduced or eliminated by adding a chain transfer agent to the polymerization reaction.This thesis describes experiments that examine film formation and polymer diffusion in poly(vinyl acetate-butyl acrylate) (P(VAc-BA)) latex films. From a practical perspective, this copolymer was chosen as a model for architectural coatings. From a theoretical perspective, this polymer allowed us to investigate polymer diffusion in films of randomly branched polymers. Polymer diffusion was studied by fluorescence resonance energy transfer (ET) measurements. This methodology requires latex particles labeled with donor and acceptor dyes.Fluorescence decay measurements of ET efficiency were used to study polymer diffusion in films of these latex samples. The most important variables that affect the polymer diffusion rate are temperature, molar mass, the nature of phase separation in the latex polymers, and the presence of gel. It was found that temperature enhances the rate of polymer diffusion, while high molar mass and a phase-separated morphology largely slow the rate of polymer diffusion. The presence of gel limits full mixing of polymers in these latex films.

The Physical Object
Pagination192 leaves.
Number of Pages192
ID Numbers
Open LibraryOL22609972M
ISBN 100612917088

Synthesis. The method of synthesis depends on the type of polyphosphazene. The most widely used method for linear polymers is based on a two-step process. In the first step a cyclic small molecule phosphazene, known as hexachlorocyclotriphosphazene, with the formula (NPCl 2) 3, is heated in a sealed system at °C to convert it to a long chain linear polymer with typica or more. Book Description. This volume documents the proceedings of the "Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December ,

Poly(butyl methacrylate) (PBMA) latex labeled with either phenanthrene or anthracene derivatives in low concentrations (1 or 2 mol %) was prepared by semicontinuous emulsion polymerization. This article describes our first experiments for preparing dye-labeled latex particles by the emulsion copolymerization of a 4/1 (w/w) mixture of vinyl acetate-butylacrylate (VAc-BA).

Book Description. This volume documents the proceedings of the Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December , Polyimides possess many desirable attributes, so this class of materials has found applications in many technologies ranging from microelectronics to high. This volume documents the proceedings of the Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December , Polyimides possess many desirable attributes, so this class of materials has found applications in many technologies ranging from microelectronics to high temperature Reviews: 1.


Share this book
You might also like
The pharmacology of psychotherapeutic drugs

The pharmacology of psychotherapeutic drugs

Christmas Fun (Holiday Fun)

Christmas Fun (Holiday Fun)

Lehrbuch uber die physische Astronomie, Theorie der Erde und Meteorologie

Lehrbuch uber die physische Astronomie, Theorie der Erde und Meteorologie

Office arithmetic.

Office arithmetic.

Katalog na patogenni mikroorganizami

Katalog na patogenni mikroorganizami

Turner.

Turner.

inner circle

inner circle

Employee participation and company structure in the European Community.

Employee participation and company structure in the European Community.

Cost accounting in textile mills

Cost accounting in textile mills

Eyewitness Art

Eyewitness Art

Report of a symposium on arthritis in general practice

Report of a symposium on arthritis in general practice

Counterparty risk externality

Counterparty risk externality

Azeotropic data

Azeotropic data

1910 Miracode Census Index

1910 Miracode Census Index

Synthesis and characterization of dye-labeled poly(vinyl acetate-butyl acrylate) latex particles and their application to film formation and polymer interdiffusion by Jung Kwon Oh Download PDF EPUB FB2

This article is cited by 32 publications. Jia Tian, Baoxuan Huang, Weian Zhang. Precise Self-Assembly and Controlled Catalysis of Thermoresponsive Core–Satellite Multicomponent Hybrid by: GPC and UV characterization suggest that nearly all of the dye monomers were incorporated into the PBMA polymer chains.

The polymerized naphthalimide dyes can be used as a donor–acceptor pair for fluorescence resonance energy transfer (FRET) by:   Compound 2 was obtained by the condensation reaction of 4-bromo-1,8-naphthalic anhydride with isobutyl amine in 1,4-dioxane as solvent.

In the second step of the synthesis, compound 2 was reacted with an excess amount of a bifunctional nucleophile, either ethylene glycol in the presence of KOH or 2-(methylamino)ethanol in the presence of triethylamine to give compounds by: * Corresponding authors a State Key Laboratory for Physical Chemistry of Solid Surfaces, Collaborative Innovation Center of Chemistry for Energy Materials, The Key Laboratory for Chemical Biology of Fujian Province, and Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, FujianChinaCited by: 1.

Synthesis and Characterization of Dye-Labeled Poly(methacrylic acid) Grafted Silica Nanoparticles Lei Wang and Brian C. Benicewicz * Department of Chemistry and Biochemistry and USC NanoCenter, University of South Carolina, Columbia, South CarolinaUnited StatesCited by: Authors contributing to RSC publications (journal articles, books or book chapters) do not need to formally request permission to reproduce material contained in this article provided that the correct acknowledgement is given with the reproduced material.

Reproduced material should be. We examined the emulsion copolymerization of vinyl acetate (VAc) with dibutyl maleate (DBM) (VAc:DBM w/w) in the presence of three dyes chosen for fluorescence resonance energy transfer (ET) experiments.

The donor dyes were 9-acryloxymethylphenanthrene (PheMA) and 9-methacryloxymethylphenanthrene (PheMMA), and the nonfluorescent acceptor dye was 2‘-acryloxy-4‘. For reproduction of material from NJC: Reproduced from Ref. XX with permission from the Centre National de la Recherche Scientifique (CNRS) and The Royal Society of Chemistry.

Synthesis and characterization of various 5′-dye-labeled ribonucleosides† Coralie De Schutter, a Vincent Roy, a Patrick Favetta, a Corentin Pavageau, b Stéphane Maisonneuve, b Nicolas Bogliotti, b Juan Xie b and Luigi A. Agrofoglio * a.

4 Synthesis and Characterization of Naphthalimide-dye-labeled Poly(HPMA-co-NMS) by RAFT Polymerization 66 Introduction 66 Experimental Section 73 General Information 73 Synthesis and Characterization of the Naphthalimide-dye-labeled CTA 74 Synthesis and Characterization of the Naphthalimide-dye-labeled.

Synthesis and characterization of a naphthalimide–dye end-labeled copolymer by reversible addition–fragmentation chain transfer (RAFT) polymerization. Binxin Li, a Daniel Majonis, a Peng Liu, a Mitchell A. Winnik a. a Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, ON M5S 3H6, Canada.

We describe the synthesis of an end-functionalized fluorescent dye-labeled poly(N-(2-thiolethyl methacrylamide) as a metal chelating polymer with a very narrow size distribution and controllable molecular weights by reversible addition–fragmentation chain transfer following, we apply this water-soluble metal-chelating polymer for surface modification of cadmium.

Synthesis and characterization of polypyrrole-coated poly Synthesis and characterization of polypyrrole-coated poly For reproduction of material from all other RSC journals and books: Reproduced from Ref. XX with permission from The Royal Society of Chemistry.

For example, they reported the synthesis of functional poly[cyclotriphosphazene-co-[4,4′-sulfonyldiphenol] with silver nanowire and Fe 3 O 4.

In addition, they synthesized thermosetting polyphosphazene-urethanes using these cyclomatrix polyphosphazenes with active hydroxyl groups [16]. Poly(Dichlorophosphazene) from P-Trichloro-N-Dichlorophosphoryl Monophosphazene Cl3P=N-POCl2 (Roger De Jaeger and Philippe Potin); Ambient Temperature Cationic Condensation Synthesis of Polyphosphazenes (Harry R.

Allcock); Some Aspects of Synthesis and Investigation of Poly(diorganoxyphosphazene)s (Wieslaw W. Sulkowski); Poly(alkyl. Synthesis and Characterization of Dye-Labeled Poly(methacrylic acid) Grafted Silica Nanoparticles Article in ACS Macro Letters 2(2)– February with 10 Reads How we measure 'reads'.

Synthesis and Microstructure Characterization of Dye-Labeled Poly(vinyl acetate-co-dibutyl maleate) Latex for Energy Transfer Experiments Article in Macromolecules 36(21) September with   Poly(lactide-co-glycolide) (PLGA) nanoparticles of different physical characteristics (size, size distribution, morphology, zeta potential) can be synthesized by controlling the parameters specific to the synthesis method employed.

A method is reported for the synthesis of nobel catalyic nanoporous carbon membranes. Defect‐free, nanoporous carbon films of −μm average thickness containing a dispersion of Pt x were synthesized on macroporous stainless‐steel supports.

Ideal gas selectivities for the catalytic membranes were simliar to those of inert nanoporous carbon membranes with He–N 2 = and O 2 N 2 = Title of Document: SYNTHESIS AND CHARACTERIZATION OF SURFACTANT-FREE, FLUORESCENT POLY(LACTIC-CO-GLYCOLIC) ACID NANOPARTICLES TARGETED TO INTERCELLULAR ADHESION MOLECULE -1 Zois Tsinas, Master of Science, Directed By: Associate Professor Silvia Muro, Fischell Department of Bioengineering & Institute for Bioscience and.

In recent years, the pursuit of new polymer materials based on renewable raw materials has been intensified with the aim of reusing waste materials in sustainable processes.

The synthesis of a lignin, styrene, and butyl acrylate based composite was carried out by a mass polymerization process. A series of four composites were prepared by varying the amount of lignin in 5, 10, 15, and 20 wt.Synthesis and Microstructure Characterization of Dye-Labeled Poly(vinyl acetate-co-dibutyl maleate) Latex for Energy Transfer Experiments Wu, Jun Oh, Jung Kwon.Synthesis and Microstructure Characterization of Dye-Labeled Poly(vinyl acetate-co-dibutyl maleate) Latex for Energy Transfer Experiments.

Macromolecules36 (21),